Before it fails, you may also notice squeaking from the water pump pulley. The covers use a combination of 10mm and 12mm fasteners, so note the location of each to aid in re-assembly. Pull hoses from the fittings to remove. Step 7 — Time engine and remove timing belt Before removing the timing belt, the engine must be rotated to ensure the crankshaft and camshafts are properly positioned. I am at 180k and no issues with the pump yet, but he did tell me that he would change the pump at the next belt change which is now. Install the new water pump onto the locating studs.
Then, place a drain pan under the radiator's drain plug before removing the plug and catching the coolant. Top off cooling system as necessary. This article applies to the Toyota 4Runner V6. This article applies to the Toyota. Make sure to change out a bad water pump in order to prolong the life of your engine.
Once compressed, a small screwdriver, nail, or screw can be placed in the hole to act as a stop and maintain compression. Balancer removal using balancer removal tool. The radiator will come out of the truck before the fan shroud. Dont drain the fluid it will have to be towed to fix it. Aligning the timing marks on the timing belt with their corresponding marks on the crank and camshaft sprockets. The compressor is supported by 3 bolts; however, on some models a small support bracket that is held in place by 2 bolts must first be removed to access the compressor bolts.
All necessary gaskets and seals are included. Install the mechanism to the tensioner assembly and remove stop to allow the tensioner mechanism to apply pressure and tension the timing belt. Is there something to look for that is unforeseen. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. It also performs towing and hauling tasks admirably. Bosch Water Pumps are designed to operate in the highly-stressful environment of today's cooling systems.
Timing belt should be replaced with the pump. The following article will outline the procedure for replacing the timing belt and water pump on 2000 to 2009 Tundra models with belt driven camshafts. The 3 compressor bolts are accessible from under the truck using a 14mm socket, extension, and ratchet. See product for application and installation details. Visit AutoZone for a replacement right away and keep your big rig performing at its maximum potential.
Step 5 — Remove serpentine belt Remove the serpentine belt by turning the tensioner pulley counter-clockwise to release belt tension. Hold fan pulley in place with screwdriver while removing fourth nut. It's really when they have a timing belt that they recommend replacing it every 35000 to 50000 miles. A peek under the hood of a Toyota Tundra will quickly prove that the V-type engines equipped in the Japanese trucks are much more complex than their American counterparts. Timing belt should be replaced with the pump. Now have a problem of truck transmission slipping while in park on a hill running or shut off. This article applies to the.
This article applies to the Toyota Tundra. Nearly all car components, when allowed to stay in their worn-out or impaired state, can cause further damage to associated or nearby automotive parts. Couple days later Check Engine Lite comes on. Timing chain has 2 silver links and 1 copper link. This article applies to the.
With the tension relieved, slide the belt off of the tensioner pulley and carefully release the tensioner. Alternator sat aside in engine bay. The compressor is supported by 3 bolts; however, on some models a small support bracket that is held in place by 2 bolts must first be removed to access the compressor bolts. It gets a grating or scraping sound, which is absolutely annoying. This is interesting to read as when I wrote service for Toyota our thought on why their water pumps went out so often was the mixture content of the pink super long life coolant. Hold fan pulley in place with screwdriver while removing fourth nut.