Be sure to not touch the bare glass of the bulb. Separate the bulb from the power connector by removing the light blue clip and prying up the light grey retaining clip on the rear of the bulb's base. Separate the old high beam bulb from the power connector and replace it with a new one. If you have a newer model check out my. Im talking half off or more in some instances.
Be careful not to touch both battery terminals at the same time with your hands, fingers or any tools!. To replace a bulb in the driver side headlight assembly, you'll need a 10mm socket or wrench and a flathead screwdriver. Then pull the amber colored bulb straight out from the socket and replace it with a new one. To replace the passenger side low beam headlight bulb, locate the light grey bulb base and power connector at the back middle of the headlight assembly. The passenger side high beam is the bulb located nearest to the center of the car in the headlight assembly.
Replace the battery and the battery retaining arm. I was able to choose the mirror I needed with no problems for my 2003 mercury mountaineer. Pop off the light blue clip and pry up the black retaining clip on the rear of the bulb's base. To remove the battery terminals, loosen the two 10mm nuts and wiggle the terminals free. Headlights are one of the most important safety features on your Corolla.
AutoZone offers headlights for Toyota Corolla that ensure you're visible at all times and that reliably illuminate the road at night, in the rain or through the fog. Then pull the amber colored turn signal parking light bulb straight out from the base. If you do touch it, wipe it clean with some rubbing alcohol. Note: I am not a registered charity. Then pop off the light grey retaining power connector clip on the back of the bulb's base. The driver side high beam headlight bulb is located closest to the center of the vehicle.
The battery retaining arm is held in place by two 10mm bolts, one at the front and one at the rear of the battery. To replace the driver side low beam headlight bulb, you'll need to remove the battery retaining arm and the battery itself. Then pull it straight out from the headlight. I had looked other places online and in store and they were by far the most reasonable. My experience with Go-Parts was smooth and convenient.
Once the car battery is removed, you can easily locate the driver side low beam at the middle rear of the headlight assembly. Look behind the headlight assembly and locate the round light grey base. Look for the bolded name of the specific headlight bulb that you need to replace. No tools are necessary to replace any bulb in the passenger side headlight assembly. Replace the burnt out bulb with a new one by pushing it straight into the base. And another important factor is the price was right. Then pull the bulb straight out, pop off the blue plastic retaining clip and pry up the black plastic clip on the rear of the bulb's base.
Donations are not tax deductible. Pull the power connector straight off the bulb's base. Install our Corolla headlight replacements by hooking them up to your car's 12-volt supply for long-lasting, bright and effective light no matter what the weather. Replace the burnt out low beam bulb with a new one, re-attach the power connector, and re-install the light blue retaining clip. Pull the old bulb off the power connector and replace it with a new High Beam bulb. The bulb's base and power connector are both light grey.
With the black plastic air intake tube out of the way, you'll be able to see the black base of the driver side high beam bulb. For more of my automotive how-to guides and product reviews, click on the following links: , , , , , , , , , , , , , and. I would definitely order again thru Go-Parts. Owners of other Toyota vehicles such as the Camry, Prius, Matrix, Venza, Yaris, and Avalon may also find the guide to be useful. The driver side low beam headlight bulb is located in the middle of the headlight assembly.
To access it, you'll need a flat head screwdriver to lift up the one black plastic pop rivet that holds the black plastic air intake tube in place. For more, check out my other. Please help support this website by shopping at. Pry off the light blue power connector clip with your fingers or a small flat head screwdriver. If you found this guide to be helpful, please consider making a small donation by clicking on the PayPal. Now you can pull the low beam bulb straight off the power connector and replace it with a new bulb.
Our products are available for Same Day Store Pickup or home shipping when you order online. Locate its black base and power connector. Re-attach the power connector and the light blue retaining clip. . .